Pressure washing costs in Fresno

Here’s the ballpark for common pressure washing jobs around Fresno, CA. Want one for your own project? A photo is all it takes.

Snap a photo, get your ballpark

Free · about 15 seconds · no signup

Fresno

What it usually costs

  • Wash the house siding$0.15 – $0.56 per sq ft
  • Wash the driveway and walkways$0.11 – $0.30 per sq ft
  • Wash a deck or fence$0.31 – $0.51 per sq ft
  • Soft-wash the roof$0.15 – $0.77 per sq ft

A ballpark, not a quote. Some of these are national averages adjusted for Fresno prices, so your job could land outside them.

Pressure washing in Fresno

Dust is the everyday coat on a Fresno house. The San Joaquin Valley Air Pollution Control District says that despite years of improvement, the Valley's air basin still fails state and federal health standards for particulate matter. Its dust-control brochure traces fugitive dust to soil disturbed by digging, earthmoving, excavation and vehicle traffic.

The District's dust rules, Regulation VIII, name the sources it watches: construction sites, earthmoving, bulk materials, vacant land, paved and unpaved roads, and farms. Its rule of thumb fits on a sticky note. If you see dust, control it.

Bare ground counts. Under Rule 8011, an open area includes undeveloped land next to a neighborhood, and a subdivided lot with nothing built on it yet. If your street backs onto a field or an unbuilt lot, that's the kind of ground the rule covers.

For a wash, that means the job starts dry. Fine dust on stucco, screens and window sills turns to mud the second water hits it. Brushing off what you can and rinsing from the top of the wall down keeps it from running in streaks. On a patio or driveway, sweep before anyone turns on the machine.

When a building site or a bare lot next door keeps dusting your walls, the District's rule is plain: anyone running a dust-making job must not cause a nuisance, and violations can bring fines. Its Central Region office on East Gettysburg Avenue in Fresno takes dust complaints for Fresno, Madera and Kings counties at 1-800-870-1037.

Questions homeowners ask

How accurate is a photo estimate?
It’s a ballpark, not a quote. A photo gives us a good read on the surface and how dirty it is, but a pro who sees the whole property will always be more precise. Use our number as the range to expect before you start calling around.
How is pressure washing priced?
Mostly by the square footage and the surface — a concrete driveway is cheaper per foot than siding or a wood deck, which need a gentler soft-wash. Heavy algae, mildew, or oil stains add to it because they take detergent and a second pass.
Will pressure washing damage my siding or deck?
It can if it’s done at full pressure on the wrong surface — that’s why good pros soft-wash siding and wood. Our ballpark factors in the gentler method for delicate surfaces.
Is this really free?
Yes. No signup, no credit card, no spam. We only make money if you choose to connect with a local pro — and that’s up to you.
What photo works best?
One shot showing the full surface you want cleaned — the whole driveway or the side of the house — gives the best read on the size and how dirty it is.

Want a ballpark for your project?

Snap a photo and get a rough price range in seconds. Free, no signup.