Fence or deck costs in Baltimore

Here’s the ballpark for common fence or deck jobs around Baltimore, MD. Want one for your own project? A photo is all it takes.

Snap a photo, get your ballpark

Free · about 15 seconds · no signup

Baltimore

What it usually costs

  • Build a wood fence$30 – $39 per linear foot
  • Build a vinyl or metal fence$16 – $63 per linear foot
  • Build a chain-link fence$11 – $27 per linear foot
  • Build a wood deck$16 – $52 per sq ft
  • Build a composite deck$26 – $84 per sq ft

A ballpark, not a quote. Some of these are national averages adjusted for Baltimore prices, so your job could land outside them.

Fence or deck in Baltimore

Half the homes in the city of Baltimore are attached single-family houses, and only about one in seven stands alone. If you own a rowhouse, your fence is probably a short run across the back yard to the alley. That's a small job in feet. But a mid-row house has no side yard, so posts, boards and concrete come in through the alley or straight through the house.

The city's building code keeps fences low by default. A fence can be no taller than 42 inches, measured on the high side. Around a house, it can go up to 6 feet, but only in a side or rear yard. So a privacy fence belongs out back, and the front stays low.

Age adds to the job. About four in ten homes in the city were built before 1940. If yours is one of them, ask the crew how they'll deal with old posts and footings that sit where the new ones go.

The city's design criteria table sets the frost line at 30 inches, so new deck footings go at least that deep. The same table rates termite risk as moderate to heavy and weathering as severe.

Questions homeowners ask

How accurate is a photo estimate?
It’s a ballpark, not a quote. A photo tells us a lot about the material and size, but a local pro who walks the yard will always be more precise. Use our number as the range to expect before you start calling around.
How is a fence priced versus a deck?
Fences are usually priced by the foot and decks by the square foot. We’ll ask one quick question to tell which you’re after, then size it from your photo and your answers.
Which materials can you estimate?
Wood, vinyl, chain-link and metal for fences; pressure-treated wood and composite for decks. Material is the single biggest price swing, so it’s worth picking the one you want.
Is this really free?
Yes. No signup, no credit card, no spam. We only make money if you choose to connect with a local pro — and that’s up to you.
What photo works best?
A wide shot of where the fence or deck will go — or of the old one you’re replacing — works best.

Want a ballpark for your project?

Snap a photo and get a rough price range in seconds. Free, no signup.