Pressure washing costs in Baltimore
Here’s the ballpark for common pressure washing jobs around Baltimore, MD. Want one for your own project? A photo is all it takes.
Free · about 15 seconds · no signup
What it usually costs
- Wash the house siding$0.25 – $0.80 per sq ft
- Wash the driveway and walkways$0.20 – $0.50 per sq ft
- Wash a deck or fence$0.31 – $0.52 per sq ft
- Soft-wash the roof$0.30 – $0.45 per sq ft
A ballpark, not a quote. Some of these are national averages adjusted for Baltimore prices, so your job could land outside them.
Pressure washing in Baltimore
Baltimore's own code has a short list of things that can't go down a storm drain. It bars free-floating or emulsified oils that leave a film on the water, acids or alkalies strong enough to damage the drains, and any other pollutant that would hurt water quality. So the rinse from an oil-stained parking pad or an acid brick cleaner needs somewhere else to go.
Brick rowhouses get gentle handling in the city's historic districts. The design guidelines from CHAP, the preservation commission, call for a low-pressure spray of 100 to 400 psi and natural-bristle brushes, and they say to under-clean rather than over-clean. Water blasted above 400 psi is out, and sandblasting is never allowed. If your mortar joints are crumbling, CHAP wants them repointed before the wash, to limit how much water gets into the wall.
Stripping old paint is a different job. Maryland's rules for lead abatement work ban uncontained hydro-blasting, and they allow the contained kind only on exterior work. And CHAP's guidelines note that taking paint off a building requires a building permit in Baltimore City.
Questions homeowners ask
How accurate is a photo estimate?
How is pressure washing priced?
Will pressure washing damage my siding or deck?
Is this really free?
What photo works best?
Want a ballpark for your project?
Snap a photo and get a rough price range in seconds. Free, no signup.